G-USFlag.gif (33395 bytes) N2NSA'S WEB SITEG-USFlag.gif (33395 bytes)

            G-RedBallMotion.gif (3253 bytes)

 

main page

photo page

favorite links

history page

 

 

Could be, You are Missing Something Fun.

Greg Jones, WD5IVD

 

Packet radio has been around since the mid-1960's, but was first seen on the

 amateur bands in 1978 through research done by the Montreal Amateur Radio

 

Club.  This was followed by the creation of the first TNC (Terminal Node

Controller) designed by Doug Lockhart, VE7APU, of the Vancouver Amateur Digital

Communication Group (VADCG).  This was then followed by TAPR (Tucson Amateur

Packet Radio) with the creation of the TNC-1 in 1982 and then the TNC-2 in

'84-'85.  Ten years ago, the packet radio revolution ignited when TAPR sold

over a thousand TNC-2 kits.  The TNC-2 was what was needed to make this

mode, that a few experimenters were playing with, into something that every

amateur could enjoy.  From its humble beginnings, where it was good luck to

have more than three packet operators in the same city, packet radio now has

thousands of amateurs using it daily, various manufacturers making and

selling TNCs (terminal Node Controllers), and over a hundred thousand TNCs

having been sold to date.  What growth!  No other mode of amateur radio has

seen such explosive growth!

 

Like the title says, 'Why Packet Radio ?'  Like any mode in the amateur

service, it provides a group of amateurs with a way of having fun and

meeting one of our primary aims Q 'improving the radio art.'  Packet radio

was a new mode in the early 80's that many of the outstanding amateur

experimenters worked on and developed.   The result, ten years later, is

something that provides a lot of different operating opportunities.  No

longer is it just packet radio, but now it is bulletin board systems, DX

Clusters, chat bridges, networking, emergency communications, satellite

operations and much more.  But what are these ?  and is one of these,

something that you want to do?   How do you know?  Let's start off with a

basic question.

 

% What is packet radio?

The good thing about packet radio is that you don't really have to know a

lot about how it works or find it necessary to memorize a whole new set of

technical terms.  Find a friend who is using packet, buy your TNC (terminal

node controller), hook up your unit, and then ask for help.  The nice thing

these days is that almost every town has someone on packet radio who can

help.  A basic TNC allows your computer to use your radio to talk to another

computer, thus combining two popular hobbies Q computers and radios.  The

cost of the TNC is going to depend on what you want to do.  The question

that you should ask before 'What TNC do I want?' is 'Why do I want to invest

in new equipment?'  Let's spend the rest of the article talking a little

about the most popular uses of packet radio.  After you read this, find

someone locally on packet and ask for a demonstration.  Since amateur packet

radio is different in every fifty mile radius, then what I can do here in

Austin, Texas is going to be different from what you can do where you are.

Find out what you are going to do before spending your money, unless you

want to blaze a new trail of services in your area.

 

Packet Bulletin Board Systems (BBS):   Most cities have one or more packet

Bulletin Board Systems, or BBS for short.  BBSs do two main things: send and

receive personal messages for their local users (like yourself) and send and

receive messages or bulletins intended for people locally or around the

world. Since the BBS is part of a national system of other BBSs, it has the

ability to pass information or messages to any other BBS in the US or the

world.  This allows you to send messages to friends locally, to someone

located in the next state, or to someone on the other side of the world.

The second thing that BBSs do is pass local and national bulletins, which

are messages intended to be read by everyone.  In this way, amateurs can

read the latest messages about the ARRL, AMSAT, TAPR, propagation, DX, and

other bulletins on varied topics.   Message passing is the primary purpose of

a BBS system, but BBSs can also support callbook programs, help references,

Internet access, and more.  Operators of BBS systems are a good place to

start when you first get on the air.   Because of the service they provide,

they have to know how packet is working in the local area.

 

Keyboard-to-Keyboard: Like other amateur modes (SSB, FM, etc), packet radio

can be used to talk to other amateurs directly.  Amateurs can talk to each

other simultaneously using their keyboards when they can directly

communicate with each other.  With the use of networks (see a little later),

amateurs can talk at a distance beyond the reach of their own stations by

using the network.  Keyboard-to-keyboard communications is one of the least

frequent methods of packet communications, because amateurs are rarely on

packet at the same time. Many packet operators send electronic mail using

either personal mailboxes or a local BBS.  In this way, messages are read

when the amateur is on the air.   Another limitation to direct

keyboard-to-keyboard packet is that you can only talk to one packet station

at a time Q no easy way to hold round-table discussions like on a voice

repeater.  Some areas support chat or conference bridges, which allow for

more than one amateur to talk to each other Q much like a voice repeater.

If a chat is supported over a network, then you can talk to someone as far

away as the network reaches. 

 

DX Packet Cluster:  Many cities have DX (foreign amateur) spotting nodes or

networks.  HF (High-Frequency) operators connect to their local DX Packet

Cluster in order to receive reports on the latest DX.  This type of packet

came about from those interested in 'chasing' DX.  Many amateurs like to

frequent the HF bands looking for rare international operators to contact.

A DX Cluster allows many HF operators to be connected over packet radio at

the same time while operating HF and hunting for DX.  When someone finds a

DX station, they send a packet message to the DX Cluster, which then sends

the information to all other packet operators using the DX Cluster.  In this

way, you have several stations monitoring the band, looking for DX.  Often

an amateur will 'spot' (hear) a DX station and then distribute the DX report

almost instantly.  DX Clusters allow everyone to operate many more hard to

find DX stations in one evening than was possible operating by oneself.

Some amateurs have been known to attain enough contacts to qualify for DXCC

in a matter of weeks.  One point though, if your HF station is not a

'big-gun', then it is sometimes best to operate the DX station before

posting your spot for others to find.   There is a good chance that a pile-up

will occur as soon as you make your spot to the DX Cluster and then you will

not be able to work the DX station that you found!

 

RACES/ARES/NTS and Emergency Communications:  Packet radio is being used in

many emergency services.  Whether packet is used to pass a message

accurately and in large quantities or to handle messages passed by the

National Traffic System, it can provide an important function like any other

amateur mode when used correctly.   A new application called APRS combines

GPS (Global Positioning Satellites) with packet radio to allow a master

station to plot on their computer the location of all other stations in the

field.  The purpose is to coordinate the exact position of weather spotters

or searchers, without having to waste radio time informing the control

station of their locations.  Recently, amateurs in Oklahoma have been

distributing Doppler Radar images via the packet network.  The small weather

image file takes but a few minutes to retrieve and display.  This helps

those amateurs outside of the local ATV coverage to get an accurate weather

picture from the Doppler Radar.

 

Networking:  Since amateurs use radios to transmit their data, their range

of communications is limited to approximately line of sight.  An average

packet station talks in a radius of about 10-30 miles.  Packet Networks

allow amateurs to widen the area of communications past their line of sight,

by having a series of packet stations linked by radio, that can be used to

get their packet messages to where ever the network goes.  Much like the

telephone system, networks provide long distance service outside the local

area.  There are a number of amateur networks which allow amateurs to travel

from one area to another.  Network types include: Net/Rom, TCP/IP, TexNet,

G8BPQ, ROSE, KaNodes, Flexnet and many more.   These networks are typically built by

a local or regional group that allows packet operators to get outside of

their area.  Amateurs get hooked on building and maintaining such networks,

just like some amateurs operate DX or handle emergency communications.  The

type of network you use locally will depend on your area.  Much depends on

the network philosophy the local group has chosen when developing their

network.

 

Satellite Communications:  Many of the amateur radio satellites in orbit

contain computer systems that provide packet capability.  Most packet

satellites provide BBS-like functions for messages to be passed to anywhere

in the world within 24 hours.  Several contain CCD cameras, which allow

amateurs to download images of the earth and some allow users to retrieve

data from the onboard experiments.   Most satellites use AX.25 with special

software developed for satellite communications.  DOVE, Digital Orbit Voice

Encoder, can be received with any normal VHF/FM 2-meter packet station, but

most of the packet satellites use SSB and require more complex equipment in

order to operate them.  Just something else to spend your amateur dollars

on.

 

Conclusion:  These are just some of the things you can do with packet radio.

Once you find something that you can do with packet radio, then you have a

reason to purchase the equipment necessary to get on the air.  A good place

to start is to find a friend who uses packet and go visit.  See what your

local area has to offer.  As already stated, packet radio changes every

50-mile radius.  What is being done where I operate is probably slightly

different than what you can do where you live. 

 

Finding a local Elmer is an important first step.

 

---

 

References:

Finke, C. R. (Ed.) (1992, February 15).  TPRS Quarterly Report.  Texas

Packet Radio Society, Inc.

 

Jones, G., G. Knezek, M. Hata.   (1992).  Packet Radio Prospects for

Educational Data Communications.   Proceedings of the Ninth International

Conference  on Technology in Education, 1, 218-219.  Paris, France.

 

Lucas, Larry, Greg Jones, David Moore.   (1992)  An Educator's Alternative to

Costly Telecommunications.  Texas Center for Educational Technology,

University of North Texas.